Arctic - 1000 Enclosed Frame Compressor



3 Stage Arctic Compressor Block featuring:

•  Air Cooled with a High Velocity, 10 Bladed Fan

•  Relief Valves on All Stages

•  Aluminum Inter Coolers

•  Stainless Steel After Cooler

•  Interstage and Final Moisture Separators

•  Aluminum Crankcase

•  Forged Steel Crankshaft

•  Cast Iron Cylinders

• Fully Enclosed Sound Dampened Cabinet

• Lift Off Panel Hinges

• Liquid Filled Interstage Pressure Gauges

• Moisture/Carbon Monoxide Visual Indicator

• Double Rubber Vibration Isolation

• Automatic Condensate Drain System

• Pressure Switch

• Hour Meter

• Single or Three Phase Electric Motor

• Emergency Stop Push Button


• 24,000 Cu. Ft. at 80 degrees Fahrenheit filtration system designed to provide C.G.A. Grade “E” breathing air.

• System uses a dryer bed to remove water in excess of dew point –65 degrees. (NFPA 1500 standard)

• Activated charcoal and a carbon monoxide catalyst remove remaining contaminants to provide CGA Grade “E” breathing air. OPTIONAL FEATURES:

• Real Time Electronic CO Monitor

• Additional Filtration Capacity

• Low Oil Level Shutdown ELECTRICAL REQUIREMENTS: The compressor requires a minimum 40 Amp, 230 Volt connection for single-phase operation, and 30 AMP, 230 or 208 Volt connection for three-phase operation

Fire Apparatus Sales & Service
Phone: 814.472.8650
Fax:  814.472.4520
Ebensburg, PA  15931

Kaza Fire Trucks  A Division of Kaza Fire Equipment, LLC.   814-472-8650  | Fax:  814-472-4520 |

Website Created By: |  ©2020, All Rights Reserved.